BRIGANTE PROJECT

While chopping down two tall barrel bushings, we thought that the cut off rests could be reused to make a pair of plugs. The new generation of Calibers have a round KP hole, which makes the hangar free to lean. there is enough space to fit the plug, we just sanded a bit the paint on the bore. a new generation hangar on top and an old one below. After roughly cutting the bushing with a knife (definitely not the best way to do that!) we put the slice in the bushing seat. We marked the edges with a marker and trimmed with the knife again to the kp hole diameter. The slice is about 2/3 mm thick, we sanded and smoothed all the corners on the grip of a skateboard.   May pe patient sanding little by little and checking oftet if the plug fits the hangar hole. we used a very hard bushing, which was easier to cut and sand, and may last longer. the plug in place, ready to ride The plug avoids side-to-side play in the hangar. Combined with a good tight pivot cup,...

Almost two years ago we rode the Bruko 50 Free during our trip between Slovakia and Czech Republic . The board holded up extremely well and we could skate anything that we ran into: sidewalks, parks and hills. Back to Italy we spoke a lot with Bruko about the shape of the deck and finally they came up with a new symmetric, more functionnal model, the Wooland. we mesured it: L 96cm W 23cm WB (inner holes) 46 cm old school truck mounting We rode it on Independent 169, bones hardcore medium bushing, and Retro Freeride 86a / Orangatang Fat free 86a. an Earthwing Crewzer 38 and the Wooland 40 side to side The finishing and the handcrafted details are beautiful, the kicks rise gently and are less steep that the classic street decks. This allows a good pop with larger wheels. The wheel wells are deep and fit pretty good with the Indys, the concave is deep enough to lock the feet while sliding (also thanks to the sharp rails) but it's...

Rome, Bologna, Vienna, Bratislava, Nitra, Prague, Kozakov, Strasbourg, Paris, Bilbao. Hard to ride this deck again after all the cities it visited, Rut gave it a second life as an artwork!

The last number of the french longboard magazine, directed by Marvin Thine, is finally out and this time also in english version. Starting from page 40 you'll find an article talking about us. We must thank Adriano Spalvieri, Jacques Chardenal and Matteo Di Carlo for the additional pictures. Enjoy! Here's the blog of the mag

Here how my Comet Ethos 40 looks like after I chopped off the nose and part of the kick tail. The nose had some bad cracks and the tail was wrapping and I realized it was not necessary on a deck I use for dh. I also drilled some new holes on the back truck to have a longer wheelbase. I actually ride a symmetrical setup with randal 180mm 42° and divine barrel bushings 90a. increasing the wb by about 2cm handmade wheelwells lighter and easier to carry! Here's some footage on my local hill